Inflatable Boat Accessories
One of NZ's largest range of inflatable boat accessories. Dolly wheels, launching wheels, Bimini tops, 12V pumps, davits, storage bags, ladders, tiller handles, D-rings, glue, rod holders, swivels, pedestals and much more.
Rockcat inflatable boats from Rockboat Marine.
We added all the items our customers requested to our latest inflatable boat design. we had these purpose made to fit your requirements.
* Three Sizes:
260 (2.6m x 1.55m), Boat weighs 36kg. Max 8HP
300 (3m x 1.55m), Boat weighs 38kg. Max 10HP
330 (3.3m x 1.65m), Boat weighs 41kg. Max 15HP
* Large 480mm pontoons with 4 compartments along with the air floor makes 5.
* Marine ply transom
* Closed transom.
* Transom plates
* Fins on the pontoons for better maneuverability.
* 2 x bench seats.
* One way drain valve
* Foot pump
* Repair Kit
* Lots of d-rings
* Grab rope on each side
* Oars fixed and ready to go.
* Oar locks
* Oar holders
* Made from PVC
* Wide rub strip on the bottom of the pontoons to help protect the pontoon.
* Extra handles on the inside of the pontoon so you have something to hold onto.
* Carry bag
Freight is $79 to your nearest Mainfreight Depot
Rockboard SUP All-round Standup Paddle Board.
Our inflatable paddle board provides unparalleled stability, maneuverability, and portability for the ultimate adventure. Constructed from lightweight and durable materials, it can easily be transported and is perfect for riders of all skill levels. Enjoy the ultimate outdoors experience.
This is the all-around inflatable SUP you have been looking for to hit the waters this summer. All Rockboard Paddleboards come with 3 fins, telescopic paddle, repair kit, pump and back pack carry bag that fits everything in.
- WD technology with weaved drop stitch. These high tensile yarns and weave structure that ensures a high strength and form locked combination of the fabric surface
- Tri-Fin design with two molded plastic/flexible side fins and one center (removable) Fin for directional stability
- Heavy Duty Carrying Handle for easy transport
- Extra Large non-slip diamond grooving EVA traction pad
- High Pressure recessed valve for quick and easy inflation/deflation up to 15 psi
- Dimensions: Length 10' x Width 30 x Height 6
- Weight Capacity 200kg
- Hand Pump with gauge
- Safety leash
- Repair kit
- Back Pack Carry Bag Back, fits full all the gear so you can hike to those special places.
- Telescopic Paddle
Rockboard SUP All-round Standup Paddle Board.
This is the all-around inflatable SUP you have been looking for to hit the waters this summer. All Rockboard Paddleboards come with 3 fins, paddle, repair kit, pump and carry bag that fits everything in.
- Multi-Layered MSL technology fusing a second layer of hard wearing polymer to the drop stitching core at the raw material stage for extra strength and durability
- Tri-Fin design with two molded plastic/flexible side fins and one center (removable) Fin for directional stability
- Looks amazing with wood design
- Heavy Duty Carrying Handle for easy transport
- Extra Large non-slip diamond grooving EVA traction pad
- High Pressure recessed valve for quick and easy inflation/deflation up to 15 psi
- Dimensions: Length 10' 6 x Width 32 x Height 6
- Weight Capacity 200kg
- Hand Pump with gauge
- Safety leash
- Repair kit
- Back Pack Carry Bag, fits full all the gear so you can hike to those special places
- Telescopic Paddle
Outboard Motor Covers:
**HP rating is a guide only so please measure as per illustration before ordering**
Our outboard motor covers are made from 600 denier marine grade polyester. The fabric we use is coated with polyurethane, UV protected, mildew resistant and is solution dyed which prevents major fading. What this all adds up to is one of the best semi custom covers available. This is not a disposable type cover but is made for years of use. Smart protection for your outboard.
- protects from UV rays and sun damage
- great for storage against all of NZs elements
- marine grade 100% solution dyed, 600d polyester with PU coating
- water resistant > 1200kpa breathable and mildew resistant
- high strength fabric engineered for extra durability and maximum weather protection
- zip and drawstring for snug fit
- fits most leading manufacturers ie: Honda, Yamaha, Mercury, Johnson, Evinrude, and Suzuki
**HP rating is a guide only so please measure as per illustration before ordering**
up to 6hp - H0.98m x C1.25m
6-15hp - H1.10m x C1.40m
15-20hp - H1.20m x C1.45m
30-50hp - H1.40m x C1.76m
60-90hp - H1.65m x C190m
100-150hp - H1.8m x C2.15m
175-225hp - H1.9m x C2.3m
225-250hp - H2.0m x C2.45m
Colours available, Black or Navy Blue.
Price is for one outboard motor cover. Colour may vary slightly to image.
-
Jet ski covers, latest style, no ugly strip down the middle.
Our Southern Storm series Jetski covers with Solution Dyed fabric is one of the best in the semi custom market. The Solution Dyed Marine Grade Polyester Cover is coated with Polyurethane having improved water and UV resistant. Solution Dyed fabric has excellent abrasion, superior colour consistency, vibrant colours and superior everyday cleanability. This specific breathable fabric allows moisture to escape which ensure its mold and mildew resistant. It comes with a storage bag to keep the cover safe when not in use. These are not a disposable type cover.
Stylish protection for your jet ski:
√ Protect your jet ski from UV rays, fading and sun damage
√ Weather resistant - great for winter storage
√ Stylish - coordinates the total look of your jet ski
√ Water resistant >1200kpa, Breathable, Mildew resistance
√ Marine grade 100% solution dyed 600D polyester with PU Coating. One of the best there is.
√ High strength fabric engineered for extra durability and maximum weather protection
√ Snug fit reinforced sewn-in elastic cord
√ Double stitched interlock seams with “Rot-Proof” thread
√ Quick release buckles with adjustable straps -
The following are available:
-
Size - Boat Size Guide
S - 2.40 - 2.66m
M - 2.69 - 2.95m
L - 2.95 - 3.43m
XL - 3.48 - 3.55m -
Colour: Black
-
These are a semi custom cover so will not fit perfectly like a factory cover. Fit will vary between different models.
-
Stylish protection for your jet ski:
√ Protect your jet ski from UV rays, fading and sun damage
√ Weather resistant - great for winter storage
√ Stylish - coordinates the total look of your jet ski
√ Water resistant >1200kpa, Breathable, Mildew resistance
√ Marine grade 100% solution dyed 600D polyester with PU Coating. One of the best there is.
√ High strength fabric engineered for extra durability and maximum weather protection
√ Snug fit reinforced sewn-in elastic cord
√ Double stitched interlock seams with “Rot-Proof” thread
√ Quick release buckles with adjustable straps
√ Also supplied with a 5m adjustable tie down for added securing. Trim yourself to required length -
The following are available:
Size - Boat Size Guide
S - 2.40 - 2.66m
M - 2.69 - 2.95m
L - 2.95 - 3.43m
XL - 3.48 - 3.55mColour: Black
Dinghy Launching Trolley (160kg) - A stainless steel launching trolley which completely folds up for easy storage.
Made from stainless steel, it has a carrying capacity of 160kg and will fit most dinghies & inflatables up to 3.9m.
- Overall Trolley Length: 2.210 (not including wheels)
- Trolley Width: 1.52m
- Size Folded: L1.220m x W 0.310m
product does require assembly. This is very simple and only requires a spanner or a socket
Keywords: Boat trailer, boat trolley, launching trolley, dinghy trailer, dinghy trolley, dolly trailer, dolly trolley
PLEASE NOTE THIS IS A LAUNCHING TROLLEY ONLY AND IS NOT TO BE TOWED BEHIND A VEHICLE.
Electric Air Pump for Inflatable Boats.
**Please note the new model has a digital display not a manual dial.
Save time by replacing your foot pump with a 12V rechargeable air pump, great for inflatable boats, inflatable kayaks, camping equipment etc.
No need to carry a battery around with you, be beside your vehicle or near a power supply. Just charge the units internal battery and it can be carried anywhere with you. Simple and easy to use.
* Inbuilt rechargeable internal battery
* Set your required pressure and the blower will stop automatically when it reaches this level.
* Simply set the pressure with the push of a button.
* Digital display shows the set pressure
* Choose either KPA or PSI
* High Volume (Max 500L/Min) and high pressure 2 stage pump (max 80kpa)
* Continuous Running Time 15 minutes
* Can be used for Inflation or deflation
* Comes with carry bag and carry straps.
* Inflatable boat air valve fitting suitable for HR valves
* Supplied with 8 nozzles for use on other equipment
* Noise level 65dB/7m
* Weight 5Kgs
* 12V
* Comes with 230V NZ charger
Hose is now a push on, not as per the picture with the adapter.
The 12-Volt High Speed Air Pump / inflator for inflatable boats,SUP Boards and kayaks is powerful and reliable and has a built in cut off-switch that automatically turns pump off when the desired air pressure is reached.
Air Pump is perfect product for:
- Inflatable boats.
- Inflatable rafts.
- Inflatable kayaks.
- Drop-stitch high-pressure air floors.
- Inflatable stand up paddleboards.
- Inflatable fenders, and many more inflatable products
High Pressure Air Pump features include:
- High Speed, High-Pressure pump.
- Air pressure readings in KPa.
- Automatic Stop when chosen pressure is reached.
- Reliable combination of Turbine & Piston to reduce wear.
- Gator clips for quick connection to the 12V car battery.
- All necessary adapters are included to fit most air valves.
- Soft carry bag with storage compartments.
Boat Launching Wheels.
These dinghy wheels will make your day so much more enjoyable. Pneumatic wheels help to go over rough ground and also gives a bit more height so the outboard doesn't scrape on the ground. The curved legs allow for extra room as the wheels sit further away from the transom, so when an outboard is fitted you don't have the issue of the motor cowling hitting them. The bracket has 2 positions (up or down) pr quickly remove the wheels and store them away. Dinghy wheels like these take the hassle out of launching and retrieving your boat.
Dolly Wheel Features:
Quick Removal of wheels just leaving the brackets on the transom.
Colour available is red.
Pneumatic wheels, 265mm diameter.
Stainless steel curved legs.
Stainless steel pivot bracket (105x40mm) with 2 positions, up or down or quick removal.
Will fit most boats with outboards up to 15HP
Max weight 180kgs
Sold as a pair (2 wheels)
Price is for wheel kit only. Boat not included.
Dinghy launching wheels with quick removable plates.
No longer the hassle of having to leave your wheels mounted to the boat. These wheels are supplied with a plate that gets mounted to the boat and the wheels can then be slide in and out of the mount.
Our dolly wheels have three positions so you can flip them out of the way when in the water. Designed for small portable boats under 115kg with a solid fixed transom. Dinghy Launching Wheels allow you to move your boat while avoiding contact with sharp obstacles that could puncture or scrape the bottom.
Heavy duty, spring loaded locking system holds the wheel in position. Constructed of light weight, super strong graphite filled co-polymer and impervious to all outdoor elements.
Solid construction with 316 stainless steel axles.
Available in black only.
Comes with mounting hardware but due to different boat designs we cannot guarantee that they will work
Sold as a pair (two wheels).
Dinghy Launching Wheels.
Our dolly wheels have three positions so you can flip them out of the way when in the water. Designed for small portable boats under 115kg with a solid fixed transom. Dinghy Launching Wheels allow you to move your boat while avoiding contact with sharp obstacles that could puncture or scrape the bottom.
Heavy duty, spring loaded locking system holds the wheel in position. Constructed of light weight, super strong graphite filled co-polymer and impervious to all outdoor elements.
Solid construction with 316 stainless steel axles.
Comes with 8 x 50mm mounting bolts, washers and nylon locking nuts.
Sold as a pair (two wheels).
Dinghy Launching Wheels for Inflatable Boats and Tinnies.
Why Pay $199.
Another great Rockboat product.
Folding launching wheels that flip up out of the way when in the water. Makes launching easy and can be done by one person Designed for small, portable boats up to 140kgs. with a solid, fixed transom.
Launching wheels allow you to move your boat while avoiding contact with sharp obstacles that could puncture or scrape the bottom.
Made from marine grade Stainless steel square with pneumatic tyres.
Sold as a pair (2 wheels)
Hardware to mount the bracket onto transom is not included.
Not suitable for road use.
May not be suitable for some transom designs with larger outboards.
Inflatable launching wheels, Dinghy launching wheels
Rockboat Prop Guard.
Select size from drop down menu.
NOTE: the 9.9HP - 20HP is a 2 piece guard.
* Ensures the safety of family, friends, skiers divers and marine life
* Protects the propeller when used around rocks and underwater hazards
* Allows safer operation in shallow waters
* Less chance of the rope tangling in the propeller
Requires drilling.
Supplied with bolts and lock nuts.
Rockboat Outboard Hydrofoil.
Two Sizes:
RB40: 8HP to 39HP (except Mercury 40/50/60HP four strokes)
RB350: 40HP to 350HP
* Improves steering at both low and high rpms
* Reduces porpoising and cavitation
* Fast planing and lower on-plane RPMs saving fuel
* Crescent shaped surface funnels water flow for more thrust and control
* A must for skiers, wakeboarders etc.
Includes SS bolts/ locking washes/ rubber washers and instructions. Does require drilling.
Outboard Motor Hydrofoil.
For outboards 5HP to 150HP
Hydrofoils reduce bow rise and allow your boat to plane at lower RPM's , plus one of the most cost effective ways to save fuel. Hydrofoils help to eliminate cavitation and porpoising along with increasing stability and enabling a smoother ride.
Great for skiers, wake boarders etc, as it helps to lift the skier out of the water much quicker.
Hydrofoil comes with mounting fittings to secure and instructions.
Rockboat Outboard Motor Trolley.
Feature:
* Easy to install and remove, foldable, lightweight outboard motor bracket.
* Suitable for outboard motors of 25hp and below.
* Ergonomic handles make the cart easy to steering and transport.
* The carrier has multi‑purpose, can use for transport, also for display and repairing.
* Professional manufacturing, stable performance and high reliability
* Requires assembly
Safety Cable for Outboard Motors.
If you don't want to see your outboard sinking to the bottom then use a safety cable which attaches to the outboard and the transom plate or outboard bracket. If you think it would never happen check out for many examples.
Prevents the loss of your portable outboard from your boat.
* 60cm cable with plastic outer to prevent scratches to outboard or boat.
* Snap hooks at both ends
Outboard tiller handle with telescopic pole.
Well built product designed to give precision throttle and steering control while sitting forward so you can see where you are going.
Extends from 85cm to 113cm
Easy turn locking knob makes securing and removing easy.
For all outboards with twist grip. Comes with a removable rubber sleeve which allows fitting to 38 to 46mm tiller handles
Vertical Mount Snap Davits from Rockboat®
Supplied free with 2 x quick release davit plates valued at $168 at no extra cost. See below for further information.
Rockboat heavy duty vertical snap davits are used for attaching your inflatable boat to the swim platform which makes it easier and safer, to both mount the outboard motor and also to board the inflatable. The grey rubber pads glue onto the inflatable and the brackets bolt onto the platform. When ready to get underway you simply unhinge it from the davit head and you are free. When returning simply hinge the inflatable back on and the boat can now be swung up out of the water for transport.
Kit Includes:
* 2 x Davit Heads, 316 stainless steel
* 2 x Pads and stainless steel yokes
* 2 x Quick removal plates and pins stainless steel. The plates are fixed onto the platform and the davit heads slide into them and are locked with the pin. When not in use remove the davit head and all that's left behind is the plate.
* 8 x 50mm stainless steel bolts, washers and nuts, for mounting. If mounting platform is thicker than these your will need to purchase your own.
* 4 x 20mm stainless steel bolts with nuts for the yokes.
Glue not included. For davits you should only use the following adhesives due to its strength.
PVC Inflatables
Bostik Unigrip 999 + RFE Desmodur
Hypalon
Bostik 2405 + RFE Desmodur
9.5cm Extended Snap Davits from Rockboat®
Supplied free with 2 x quick release davit plates valued at $168 at no extra cost. See below for further information.
Rockboat heavy duty vertical snap davits are used for attaching your inflatable boat to the swim platform which makes it easier and safer, to both mount the outboard motor and also to board the inflatable. The grey rubber pads glue onto the inflatable and the brackets bolt onto the platform. When ready to get underway you simply unhinge it from the davit head and you are free. When returning simply hinge the inflatable back on and the boat can now be swung up out of the water for transport.
Kit Includes:
* 2 x Davit Heads extended by 9.5cm, 316 stainless steel
* 2 x Pads and stainless steel yokes
* 2 x Quick removal plates and pins stainless steel. The plates are fixed onto the platform and the davit heads slide into them and are locked with the pin. When not in use remove the davit head and all that's left behind is the plate.
* 8 x 50mm stainless steel bolts, washers and nuts, for mounting. If mounting platform is thicker than these your will need to purchase your own.
* 4 x 20mm stainless steel bolts with nuts for the yokes.
Glue not included. For davits you should only use the following adhesives due to its strength.
PVC Inflatables
Bostik Unigrip 999 + RFE Desmodur
Hypalon
Bostik 2405 + RFE Desmodur
Snap Davit kit with Drop and Extended Reach.
The reach is 24cm out x 10cm down from the front of the base plate . Used on higher platforms. A lock and lift system that is designed to secure and stabilise an inflatable dinghy to the back of a Motorboat or Yacht. A Practical Design made to be Strong and Long Lasting. Safe and Secure, with a Spring Loaded Lock Action. Marine Grade 316 Stainless Steel Construction with grey reinforced rubber pads
Kit Includes:
2 x Stainless steel snap davit heads
2 x Rubber mounting pads
2 x Stainless steel lock in yokes
2 x Stainless steel quick release plate (removes davit head and only leaves the plate)
8 x 50mm mounting bolts/ nuts and washers.
Glue not included. For davits you should only use the following adhesives due to its strength.
PVC Inflatables
Bostik Unigrip 999 + RFE Desmodur
Hypalon
Bostik 2405 + RFE Desmodur
Universal tender chocks are made to support hard bottom dinghies or inflatable hard bottom dinghies (RIBs) on the deck or bridge of a yacht. Simply secure to your deck, roof or swim platform and your tender will be supported securely
This Standard tilting and swiveling model chock has pads that are mounted in a swiveling yoke, so they tilt in the up/down direction - to adjust to the angle of the dinghy bottom/hull and swivels - which have better adaptability to varying hull angles.
Bimini Top for Inflatable Boats and Dinghys.
Bimini tops help to increase your time on the water by making your trip more enjoyable by protecting you from the sun and/or rain.
Our premium range bimini tops are made from high quality 600D marine grade polyester fabric, coated with polyurethane which provides greater water and UV resistance.
Support framework is made from cylindrical anodized aluminium having increased corrosion and wear resistance features.
Size: 120-130cm mounting width, 140cm long, 130cm high.
Available in black and grey.
Supplied with two mounting pads to glue onto the pontoons. Front and rear straps are held with your D-Rings (D-Rings not included).
Item will require assembly. Glue, D-Rings and mounting pads are not included but can be purchased separately.
Item and colour may vary slightly to images.
Used for attaching a stand off bracket to an inflatable dinghy
Price is for 1 pad only. Normally 2 are required per boat.
Folding Anchor Kit
The Rockboat folding anchor kit is ideal for small vessels like inflatables, kayaks, jet skis and dinghies.
Should you have to release the anchor quickly, the stainless snap fastener will ensure a fast release while the float indicates the anchors position for retrieval. To open and secure the flukes in place, you simply just rotate the locking mechanism and secure near the base of the anchor.
Folding Anchor Kit Features:
- 4 sizes available, 0.7kg, 1.5kg, 2.5kg and 3.5kgs
- 10mtrs of robe
- Galvanised collapsible anchor
- Quick release snap fastener
- Float
- Storage bag with draw string
- 4 flukes
- Easy to fold and store.
Ideal as Kayak anchor, inflatable boat anchor, jet ski anchor and dinghy anchor.
Clamp Mount Rod Holder for Boat or Kayak Fishing
Great for boat or kayak fishing. Hold your rod in place while you wait for the strike.
High quality heavy duty rod holder.
Vertical or horizontal mount
Easylift Outboard Motor Harness.
Made is the USA so you can be sure it works and meets the standards.
Simple put, it works.
* 3 sizes: 2-15HP (max weight 45kg), Heavy Duty 15-30HP (max weight 68KG) and Super Duty 30HP (max weight 180KG)
* Adjustable polyester straps attach easily to you outboard
* Designed to be left on your motor permanently and will not affect the motors operation.
* Patented design using materials that are UV, Oil, Gas and salt water resistant
* Lifting point that also doubles as a comfortable handle
* The best also means the safest! A free Saf-T-Strap provides added security by preventing slippage of straps.
Lifting hook shown in pictures is not included.
Boat Seat Clamp with Swivel
The Rockboat Adjustable Seat Bracket is an adjustable clamp-on seat bracket and comes complete with 360 degree swivel base.
Fits most inflatable and tinnes seats.
Adjusts from 230mm to 530mm
Swivels 360 degree. Fitted with ball bearings
Hole pattern fits most seats
162mm x 162mm square swivel.
Mounting kit for installing your Bimini top to an inflatable boat.
Comes with:
2 x mounting pads
2 x bolts and nuts
Not included is glue and D-rings for straps.
Colour: Black.
Foot pump for inflatable boats with large air volume of 10L.
Can be used for both inflating and deflating.
Comes with the standard HR type valve fitting which is the most common for inflatable boats and kayaks etc.
Supplied with a bellow clip so the bellows can be closed and save space when storing.
Depending on current stock colours may be different.
We also have available 2 different sized replaceable hoses with HR fitting one end and threaded fitting for the foot pump. Comes with bellow clip. Contact us with pump fitting size and we can advise price.
Pressure gauge for inflatable boats.
Make sure your inflatable boat isn't over inflatable which can cause damage to your boats seams or baffles. This easy to use pressure gauge comes with the HR type fitting so you can easier check the pressure.
* HR (Halkey Roberts) type fitting
* Rubber outer casing around gauge
* Gauge reads up to 23psi or 1.6 bar
* Has psi and bar scale
* Supplied with rubber seals for HR fitting.
PVC Glue for fixing accessories to your inflatable boat or for repairs. PVC boats only. Also have available 2 pot PVC and Hypalon glue.
Inflatable Boat Glue
For an extra strong bond and for use on parts that are under high load we recommend that you use a 2 pot glue. This is a Bostik product and is a high strength contact adhesive and perfect for inflatable boats. For water applications the RFE Desmodur must be used.
Price includes 1 x adhesive and 1 x RFE
Choose from drop down menu either PVC or Hypalon.
PVC Inflatables
100ml Bostik Unigrip 999 + RFE Desmodur
Hypalon
100ml Bostik 2405 + RFE Desmodur
Note: Due to these being classed as dangerous goods shipping times can be extended. We are also unable to courier to a P.O. Box or internationally.
Inflatable Boat Glue
For an extra strong bond and for use on parts that are under high load we recommend that you use a 2 pot glue. This is a Bostik product and is a high strength contact adhesive and perfect for inflatable boats.
Polyurethane heat resistant high strength PVC adhesive with excellent creep resistance. Very good plasticizer resistance, low staining, excellent UV resistance and good brushability.
For water applications the RFE Desmodur must be used, (NOT INCLUDED)
Price is for 1 x 1L Bostik 999
Note: Due to these being classed as dangerous goods shipping times can be extended, we are also unable to courier to a P.O. Box or internationally.
PVC repair patches for inflatable boats.
Includes 2 patches (of the colour you choose)
Colours available: Light Grey, Black, Dark Grey, Blue or Red
Each patch is approx 15cm x 12cm and may vary
PVC boats only.
Price is for 2 x patches only
Oar holder for inflatable boats.
Store your oars out of the way with these oar holders.
PVC Oar holder for your inflatable boat. Needs to be glued in place.
Colour: Black or Grey
Glue not included
Price is for 1
Carry bag and storage bag for inflatable boats, inflatable kayaks or inflatable rafts.
Comes with 2 lifting handles.
125cm long x 75cm high.
D-Ring with PVC patch. Extra strong Inflatable boat D-ring with patch for PVC inflatable boats
Large D-Ring made from 316 stainless steel
PVC patch - 25.5cm long x 13.5cm wide
Available in Grey only
Price is each.
Glue not included
Outboard motor lock from Rockboat.
Don't let your outboard be an easy target for thieves. Make their life difficult by fitting a stainless steel outboard motor lock.
Made from 316 Stainless steel
Size 305x40mm
Key ring float is not included.
Outboard transom plates from Rockboat protect your transom and allow small outboards to be fitted to inflatables, dinghies and RIB's.
There are 2 sizes with the small one going on the inside and the large plate is fitted to the outside of the transom.
They small size is made from aluminum and the large from PP. They have counter sunk screw holes so they can be attached to the transom.
Sizes:
Small inside transom plate: 295mm long x 105mm wide
Large outside transom plate: Top 265mm, Bottom 195mm x 175mm wide. Thickness 10mm
Oarlock for inflatable boats.
Rockboat Rowlock for your PVC inflatable boat. Needs to be glued in place.
Glue not included
Available in Black or Grey
PVC repair kit for inflatable boats.
Includes 2 patches (of the colour you choose) and 1 x glue.
Colours available: Grey, Black, Dark Grey, Blue or Red
Each patch is approx 15cm x 12cm
PVC boats only.
Price is for 1 x kit only, (2 x patches and 1 x glue)
Boat handle for PVC inflatable boats.
Handle for PVC inflatable boats. These inflatable boat handles are for lifting your inflatable boat. Want to add an extra lifting handle or repair one that's fallen off then these inflatable boat handles are just what you need.
Available in black or grey
Size: 245mm long x 90mm wide.
Will require gluing (glue not included).
Price is for 1 handle
Accessories for Inflatable Boats in Canada
Foldable Portable Kayak Boat Bag Inflatable Boat Accessories Maximum
Best Inflatable Boat Accessories - Temu
Boat Grab Handle, PVC Grab Handle Craft Parts for Inflatable Rubber Dinghy Raft Kayak Fishing Boat Accessory Inflatable Boat Accessories, Kayak Hardware - Canada
Buy Solarmarine Boat Rubber Bumper PVC Strake Seal Strips Inflatable Boat Accessories Anti-collision Rubbing Rails for Boats Kayaks at Aliexpress for
Solarmarine Boat Rubber Bumper PVC Strake Seal Strips Inflatable Boat Accessories Anti-collision Rubbing Rails for Boats Kayaks
Boat Accessories
Whaly Inflatable Boat 310
Aquamarine inflatable boats, river rafts, RIBs, launching wheels and accessories Canada
Portable Kayak Boat Bag Inflatable Boat Accessories 2024 Storage Bag NEW UK
The detail accessories of rib boat that is beautiful! #ribboat #ribboats #bigribboat #accessories #detail
tssuouriy 2 Pieces Kayak Canoe Track Mount Tie Down Eyelets Stainless Steel Inflatable Boat Accessories Outdoor Equipment Hardware
Inflatable Boats And Accessories China Trade,Buy China Direct From Inflatable Boats And Accessories Factories at
