RH5167VVertical 0° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This
RH5167VVertical 0° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2 OD x 6-1/2 long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications:
Angle: 0 Degrees
Construction: Stainless Steel
Diameter (Inches): 2
Finish: Polished
Length (Inches): 6-1/2
Mounting Style: Flush
Box Dimensions: 4H x 6W x 14L WT: 1.9 lbs
UPC: 096811516526
Rod Holders for Boat: Clamp On, Gunwale, Gunnel
For the ultimate installation, use our stainless steel backing plates. They are constructed from heavy gauge type 316 stainless plate and have built in safety eyes on both sides. The RH5930 accommodates all Heavy Duty 30, 15, 0 degrees rod holders in gunnels up to 1-3/4 thick. Includes stainless bolts, locknuts and washers for a maximum strength installation.
Lee's Stainless Steel Backing Plate F Heavy Rod Holders
Attwood 66364-7 Stainless Steel Flush Mount 0 Degree
Lee's 45 Degree Center Rigger Holder [AL7211CR]
Whitecap Bluewater SS 360180 Deg Removable Rod Holder S7007CBLUE - Sound Boatworks
Lee's Swivel Base Stainless Steel Rod Holders RH5365
Lee's Tackle Inc. 0 Degree Stainless Steel Swivel Base
Lee's 0 Stainless Steel Swivel Base Flush Mount Rod Holder - Extra Long Tube
C.E. Smith 80 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black
Lee's Tackle Fishing Rod Rests & Holders for sale
Lee's 0 Degree Stainless Steel Swivel Base Flush Mount Rod Holder 2.25 OD X 10.5 Tube [RH577V]